Set of 2 - Universal Non-Slip Anti-Slip Tape 50mm x 10m - Black + Yellow

About this item

Hassle-Free Exchanges & Returns for 30 Days. · 6-Month Limited Warranty. This product consists of abrasive particles bonded by a tough, durable compound to a pvc base layer. The reverse side is coated with a pressure-sensitive adhesive covered by a removable protective liner. Non-slip tape is used in applications where a temporary solution is required or for applications where a coating will not adhere to a surface. It is recommended for use in loads of different low and high-traffic environments and is extremely easy to apply. Instructions for use Ensure the surface is clean, dry, and free of any loose particles or residue. Use a cleaning solvent and wipe the area where the tape is going to be applied Cut the required length of tape Peel off the backing tape from 1 side of the tape and stick down to the furthest corner Slowly peel backing tape back while lightly sticking the tape to the floor in a straight line Once the backing tape is completely removed and the tape is in position, use a 50mm mohair paint roller with firm pressure to stick the tape down properly. Be sure to roll with pressure at the grout lines Cut the tape out of the grout lines so that moisture cannot get underneath the tape Important notes When working with slip prevention cleaning products, anti-slip chemical treatments, non-slip coatings, adhesives and power tools always wear the necessary safety protection. We suggest, as a minimum, using nitrile gloves when working with any of our products. In the event of accidental or spillage, refer to safety data sheet. Always rinse floor with clean water after use after any anti-slip or non-slip applications. Always rinse equipment and tools after use. Please respect the environment and dispose of non-slip product packaging responsibly. For more information, please view our application training videos on youtube What's in the box 2 x Anti-Slip Tape